Los casquillos de fricción KS PERMAGLIDE ® están disponibles como producto estándar con diámetros interiores de hasta 100 mm o 300 mm, según el material. Los casquillos de fricción de mayor diámetro se fabrican como producción especial a partir de chapa laminada. Los cojinetes lisos se fabrican en cualquier tamaño intermedio de 80 a 650 mm según sus necesidades.

Aplicaciones, por ejemplo

• Hydraulic energy plants

• Hydraulic pumps

• Hydraulic cylinders

• Wide-body aircraft

• Large-scale industrial plants

• Crane construction

• Drag lifts and rope lifts

• Railway construction and mining

• Shipbuilding

Materials

Large-diameter plain bearing bushes are available in all KS PERMAGLIDE® materials:

• For dry running or lubricated applications

• Unleaded or leaded

• With improved corrosion protection

* On request

Manufacturing

Sheets of different KS PERMAGLIDE® materials are processed to create thinwalled large bushes with low space requirements. The sheet sections are shaped into plain bearing bushes on roller bending machines. The nominal wall thickness of the KS PERMAGLIDE® sheets is usually 2.5 mm. The sheets are up to 236 mm wide. The sliding-surface coated sheet material is available as coilware. This means that the length of the sheets and the diameter of the bushes produced are variable.

Dimensional accuracy

The circumference of a cylindrical plain bearing with a diameter of over 120 mm is measured with a precision tape measure in accordance with ISO 3547. To comply with the permitted concentricity, the plain bearing is measured in several levels. The second important dimension for determining the bearing dimensions is the wall thickness, which is measured point by point with a gauge micrometer.

Mounting

Due to the manufacturing process, rolled bushes have a joint. The bushes are also produced with a press-in excess to the locating hole. The press-in excess is measured depending on the diameter and is several 1/10 mm. This means that the bush its closely against the locating hole in the press it and the joint is closed completely. When pressed in this way, the bushes are secured against moving both radially and axially and provide deined sliding surfaces.

Mounting a large bush is a challenge. Suitable press-it tools are not always available, as they are expensive to buy in extremely large dimensions or cause diiculties with handling. An easy method for mounting on-site is shrinking the bush with liquid nitrogen. The plain bearing is covered completely with liquid nitrogen LN2 in a receptacle. With its slim structure, the plain bearing takes on a temperature of –196 °C in just a few seconds. This reduces the volume of the plain bearing. A joint clearance to the locating hole in the millimetre range is created. This enables the plain bearing to be pressed in easily. When the plain bearing is in position, it takes on the ambient heat, expands and returns to its original form, thus forming a stable press it.

Advantages and special features

• Small batches sizes from 1 piece

• Diámetro personalizado que se desvía de las dimensiones estándar

• Casquillos de cojinete liso de grandes diámetros

• Sin costes de herramientas

• Alto grado de flexibilidad, por ejemplo, los productos se pueden fabricar rápidamente

Producción de acuerdo con los más altos estándares de calidad con tolerancias para cumplir con DIN ISO 3547

Producciones especiales están disponibles en todos los materiales estándar de KS PERMAGLIDE ®  (materiales especiales bajo pedido)

Se puede etiquetar, previa solicitud, con su número de dibujo, número de artículo, etc.